This wiki is archived and useful information is being migrated to the main bzflag.org website

Difference between revisions of "Map making by hand"

From BZFlagWiki
Jump to: navigation, search
(Groups)
(Transformations)
Line 310: Line 310:
 
Transformations are simple ways of modifying objects so that maps have some variety. These can get complicated so I will only give you a sample of what they can do. There are 3 transformations shift, spin, and shear. You can find a different also helpful page here [[3d Transformations]]
 
Transformations are simple ways of modifying objects so that maps have some variety. These can get complicated so I will only give you a sample of what they can do. There are 3 transformations shift, spin, and shear. You can find a different also helpful page here [[3d Transformations]]
  
The one is will tell you about is '''Shift'''.
+
====Shift====
  
 
'''Shift''' moves an object by the amount of units that you specify from its present position.
 
'''Shift''' moves an object by the amount of units that you specify from its present position.

Revision as of 01:32, 6 November 2010

Plywood hammer100x101.gif There is still documentation to be done here!! If you feel up to the task, please have a go at it. Specifically what needs to be added is:
Major re-organization, transform away from "chat" style. Need to reference pages elsewhere on the wiki in place of much of the content which appears to be building up here. Create them if necessary, or see the list here.

Although there are a number of GUI options for creating maps such as BZ-Edit, 3D modelers, many map-makers use a basic text-editor. There are many times when it is necessary to make small changes to a map, such as including objects that are unavailable in GUI map-maker, but there are also some who enjoy the challenge of creating a map entirely from scratch with a text-editor.

Text Editors

Most text-editors designed for coding/programming are more than sufficient for editing bzw files. Although word-processing programs such as Microsoft Word can be used, there are many cheaper (free) and more efficient programs designed specifically for coding. If you are interested in syntax highlighting, look at the forum topic.

Windows

  • Notepad
  • PSPad
  • NoteTab
  • Notepad ++ - a tabbed editor based on Scite.

Mac

  • TextWrangler
  • TextEdit

Linux

  • Command-line editors such as nano, emacs, pico, vim, or ed.
  • GEdit
  • Kate
  • Scite

Editing existing maps

Beginning mapmakers should spend some time studying and making small changes in existing maps to see how things work. In the client, maps can be saved for editing by joining the desired server and choosing: Options>Save World. Maps can also be saved by issuing the /saveworld command. The map should be a simple map when getting started. One may find it easier to create a file in BZEdit and open the resulting file in the text-editor.

Getting Started

If you have created a box in BZEdit you may see:

# World built with bzedit32 world class, available at
# http://www.sourceforge.net/projects/bzflag
world 
  size 400 
end 
options 
  +r 
  -j 
  -set _tankSpeed 25 
  -ms 5 
  -mp 0,2,0,2,0,2 
end 
box 
  name box1 
  position 0 0 0 
  size 10 10 10 
  rotation 0 
end 

What that means

"There are set variables that define various things such as how fast your tank is, how fast the bullets are, or if it's raining or foggy. Put those in the options setting with "-set(space) " in front of it. You can also make those changes as an admin by using /set _variable (notice there is a space between the set and the _). A full list of these settings can be found on the Server Variables page. Other options, such as how many times a flag can be grabbed before it resets or if flags can land on buildings are explained in this forum post Optionally, the variables can be placed in a separate configuration file and referenced when the server is started." old


First, it says:

# World built with bzedit32 world class, available at
# http://www.sourceforge.net/projects/bzflag

(Note: the # sign is used for comments.)

This is the text added by the application initially, kind of like advertising. This will be the first thing anyone sees when they look at the map.

The next thing is:

world 
  size 400 # Sets the world size to 400 (800 x 800 total)
end 

This is rather self-explanatory. It's the <size> of the <world> (The BZFlag arena).

Next is an <options> section:

options 
  +r   # Enable Ricochet
  -j   # Enable Jumping
  -set _tankSpeed 25  # Sets the tank speed to 25 bzunits/second
  -ms 5  # Sets the maximum shots (per tank) to 5
  -mp 0,2,0,2,0,2  # Maximum of 2 Red Players, 2 Blue Players, and 2 Observers
end 

This allows you to define in the map file certain options that are also available from the command line when you start the bzfs server, or in the optional server config file. Options embedded into a world file will override those input on the command line or in a config file.

The commands listed here are: Ricochet, Jumping, Tank speed, Max Shots, and Max Players. These are rather self explanatory, except for Max Players. Each number represents how many of each of the following team players are allowed in the game (in the order listed): Rogue, Red, Green, Blue, Purple, Observer. Each number defines the max number of players per category.

For more, see Options Object.

We now come to:

box 
  name box1      # Generally unused
  position 0 0 0 # X Y Z Position
  size 10 10 10  # X Y Z Size (bzunits from the position of the box)
  rotation 0     # Rotation (in degrees)
end 

This is a <box> with a <name> of <box1>. The <position> is 0,0,0 in R3[1]. The rest is pretty self explanatory.

Important: EVERY STATEMENT MUST HAVE AN END.

Basic Definitions

Objects
Objects are the basic building blocks of the bzw file. Objects begin with a line declaring the object, some fields describing that object, and a line that closes the object (usually with "end"). Each of these sections of the object is important.
Comments
BZFS ignores anything in a line following the #; the line has been "commented out." It is highly recommended that comments be used often, both for the mapmaker and for others that may see the map.
3D Cartesian Coordinate System
In most objects, you will see three numbers after position and size. These numbers are coordinates on a graph. The first number is the x coordinate (left and right) the middle number is the y coordinate (forward and backward) and the third number is the z coordinate (height and depth). Another way of thinking of it is: x = width, y = depth, z = height. (Those accustomed to the Y axis determining height will have to slightly adjust their thinking.)

Sample Objects

The Box

Perhaps the simplest object is the box. There is actually nothing special you can do to it (but in versions of BZFlag from 2.0.8 up, you can do a lot more to it). Here is an example of a box:

box
  name box1             # Optional, but good to include
  position 0 0 0
  size 10 10 10
  rotation 0
end

In the first line, notice the word "box". It simply says the next object is a box. The next line is the name of the object. It is defined with the syntax "name objectName". It is not required, but is good to include (if you have a LOT of boxes, how do you know which is which? Naming them--as well as other objects--helps you keep track). The third line defines the position of the center of the bottom of the object. The three arguments of position are the x, y, and z coordinates of the box, respectively. The x and y coordinates can be positive or negative, but the z coordinate should just be positive or zero. On the fourth line, the size of the box is defined. The arguments of size are the x, y, and z sizes of the object, respectively. The x and y arguments make the box that wide on both sides of it's position. However, the z argument makes the object exactly the number of units tall as defined. In other words, the box shown above, with a size of '10 10 10' is actually 20 units by 20 units by 10 units high, so if you want a box that is a perfect cube, you would need to make the height, or Z dimension, '20'. The next line just says how much the object is rotated. This number is the number of degrees of rotation, and can be negative or positive. The last line just tells BZFlag the object is done, and a new one can be defined. Be sure to always use this.

Below is an image of a box with a size of 5 5 10.

Box.jpg

The Cone

Most objects have similar parameters as the basic box. For instance, the code for a cone may look something like this:

cone
  name cone1
  position 0 0 0
  size 10 10 20
  divisions 128
end

Divisions basically decide how smooth the cone is. The higher the divisions the more smooth the cone is. A division of 4 would look like a pyramid. Another parameter that can be added to the cone object is angle. If you say angle 180, that would make 1/2 of a cone, 90 would make 1/4 of a cone, and so on.

The Arc

An arc is basically a cylinder. However it doesn’t have to be a perfect cylinder depending on certain options you select. For an arc the only required options are divisions, position and size. Just like the cone divisions have the same effect, position and size are all the same. Once again you can have an oval shaped cylinder type thing. Now, you WILL find more options to an arc than to a cone, for example the ratio option. The ratio options let you basically put a hole in the cylinder. So if you have the option: ratio 1 you would have a full cylinder. If you say for example ratio .3 or any number less than 1 you will get a hole in the cylinder. The bigger the number, the smaller the hole. Angle allows you to do a semicircle. Rotation, once again, isn't really needed, unless you need a semicircle that has a certain specific orientation in your map. all the options like spin and shear are the same for this object too! phydrv and matref I’ll show later. Let’s move to the sphere:

The Sphere

The only options required to make a sphere are position, size, and divisions. All these options do the same thing as they did in the objects above. You may also have an oval like sphere. You make an oval like sphere simply by making the x and y's different sizes just like in the cone and arc. The radius option is just a substitute for size. You can write size 10 10 10 or radius 10. Both do the same thing. However if you want an oval shaped sphere you have to use size. Rotation wouldn't really have an effect and the shear and spin works the same for this object.

Getting more help

  • The links at the bottom of the Map Making page.
  • The original creator of this page is flight, you can email him at dirtbikerdude_91@yahoo.com and he will be happy to answer any questions that he is capable of answering.

Special Objects

There are certain objects that are often coded by hand because it is simpler or it is impossible to do with graphical map creation tools.

Materials

Example:

material 
  name mat1 
  addtexture blue_bolt.png 
end 
meshbox 
  position 0 0 0 
  size 10 10 10 
  rotation 0 
  matref mat1 
end 

Material is letting the computer know that a material is about to be explained to it. You name it so that way you can reference it with the matref. The name can be any thing you want as long as it does not have any spaces. You type in addtexture and you state a texture name. Now, how do you know what texture names there are to use?

On Linux: Running ls /usr/share/bzflag/*.png in a terminal will show the list of pictures.

On Mac: If you control click (right click) on the bzflag icon, click show package contents, click contents, and click resources, those are the pictures you may use.

On Windows: The default path is C:\Program Files\BZFlag\data\*.png

What you will find are images that are used in every day games. The top of a base, the wall of a base. A bullet which is blue_bolt.png (as was used above). The full path to the texture needs to be used if the texture is not found in that directory. Any customized textures should be uploaded to the BZFlag Image Submission System before the map is hosted publicly.

Servers running bzfs 2.0.8 and earlier will require "meshbox" and "meshpyr" in order to apply textures and physics to these objects.


Instead of creating a new texture, many interesting and creative things can be done with the "diffuse" parameter in the material object. You can add the diffuse command and it will look like this diffuse 1 1 1 1. The first number is the amount of red that will be in the meshobject. The second number is the amount of green, the third is the amount of blue. So you can mix those colors to make more colors. You may use a range from 0-1. For example diffuse .3 .5 .26 1. The fourth number determines the opacity or transparency (the see-throughability). 0 is invisible, .5 is half invisible, and 1 is normal.

material 
  name mat1 
  diffuse .5 .25 .1 .6 
  addtexture mesh.png 
end

Physics

Physics make your tank behave in different ways. If you have ever played laser mania by Louman than you know on the outskirts of the map there is something you can jump on and you go really fast, that is a physics. Physics and materials work the same way. Physics is to material as phydrv is to matref. You must specify a physics then on a meshbox, meshpyr cone arc sphere or whatever, you can reference that physics by using the phydrv command just like you would use the matref command for materials. There are different physics commands. Linear, angular, slide and death. In the Louman map I mentioned above is a linear physics. Linear physics makes your tank move in a line. The numbers after a linear command are just like position x y z. Example:

physics 
  name phy1 
  linear 50 0 0 
end 

This will make your tank move at a speed of 50 in a positive x direction you may use -50 and it will make it go the other way.

physics 
  name phy2 
  linear 0 50 0 
end 

This will make your tank move at a speed of 50 in a positive y direction

physics 
  name phy3 
  linear 0 0 50 
end 

This will make your tank jump at a speed of 50

physics 
  name phy4 
  slide 5 0 
end 

This will make your tank basically feel like it's on ice. Whichever way the tank is moving it will keep moving that way.

physics 
  name phy5 
  death haha! you died 
end 

This will make the tank die when it touches the object that refers to this and the message haha! you died will be displayed to that person.

example:

physics 
  name phy1 
  death I like you better dead! 
end 
meshbox 
  position 0 0 0 
  size 10 10 10 
  rotation 0 
  phydrv phy1                       # Or what ever you named the physics.
end 

This works just like the material

The thing about physics and materials is that they have to be written before they are referenced.

This won't work

meshbox 
  position 0 0 0 
  size 10 10 10 
  rotation 0 
  matref mat1 
end 
material 
  name mat1 
  addtexture blue_team.png 
end

Groups

A group is cluster of objects that can be "gathered together" and treated as if they were a single object. Certain things cannot be included in groups:

  • textureMatrix
  • dynamicColor
  • material
  • physics
  • links
  • weapon
  • zone

Notice that while teleporters aren't excluded from groups, you can't create links to teleporters within a group, except for purely random ones using "*"(asterisk) for the link.

Groups can be nested (you can have a group that is included in another group).

For example if a map editor is making a forest, and each tree contains 2 objects, the editor doesn't want to type up the code for each tree over and over again. What he can do is tell BZFS that these objects = tree. And then whenever he wants to make a tree he just calls that group, as shown below.

Example-----------

first define a group of obects as a tree


 define tree
 
 box
 position 0 0 0
 size 2 2 4
 end
 
 pyramid
 position 0 0 3
 size 5 5 10
 end
 
 enddef


...then, to call the "tree" group, just:

 group tree
 position 0 0 0
 end

Transformations

Transformations are simple ways of modifying objects so that maps have some variety. These can get complicated so I will only give you a sample of what they can do. There are 3 transformations shift, spin, and shear. You can find a different also helpful page here 3d Transformations

Shift

Shift moves an object by the amount of units that you specify from its present position. the object..

 box
 position 10 10 0
 end

is at place 10 10 0

while the object..

 box
 position 10 10 0
 shift 0 0 10
 end

is at position 10 10 10.

Spin

Spinning an object is just like rotating an object but can be on a different axis. (y and x) When you rotate it is around the center of the object. Remember: Only spin-able objects can be spun. Here is what the code looks like:

meshbox
  position 0 0 0 
  rotation 0
  size 10 10 10
  spin 45 0 1 0
end

The meshbox will now be tilted 45 degrees on its y axis. Spin code has four numbers, the first one is how many degrees to spin. The last three are for which axis's to spin, by placing a value of more than 0. Spin can be a bit tricky and unintuitive to use. It is not exactly like rotate, because it is possible to "spin" something so that it ends up "underneath" the BZFlag playing field.

Spin is often best used with shift. Think of the center of your map as a sort of "construction yard". You position objects at location 0 0 0, then spin and shift them to the location you want.

Here is what you get if you use the above code in a map:

Bzfi0012.png

Looks fairly normal in this screenshot, doesn't it. But if you drive around, the box will behave oddly, and appear to "float" in front of your HUD. What has happened is that the box hasn't rotated around it's own axis, but around the world axis for the whole BZFlag arena! But if we add some code to shift the box up above the z plane, it will look normal in-game.

So if we make a simple change to the above code and add a shift statement and shift the box up in z (this is not the z axis of the box, but the world axis of our game arena):

meshbox
  position 0 0 0 
  rotation 0
  size 10 10 10
  spin 45 0 1 0
  shift 0 0 10
end

...we get this:

Bzfi0013.png

... and the box doesn't do the weird "float" thing any more. This "construction yard" technique is really handy, you just "build" your stuff smack in the middle of your map, then spin and shift it to where you want it (in the example above, it could have been shifted in x and y as well. Just don't shift and then spin, or you will be back to having things "float" again.

With shift and spin you can also work with groups and make a "master" group in the middle of your map, then shift and spin multiple copies to other locations on your map.